FANDA

OUR PRODUCTS

BM-400 Mixer/Mill

High-Energy Ball Mill

8000M), is a high-energy ball mill that grinds up to 0.2 – 10 grams of dry, brittle samples. The vial, which contains a sample and one or more balls, is shaken in a complex motion that combines back-and-forth swings with short lateral movements, each end of the vial describing a figure-8. The clamp’s motion develops strong G-forces in the vial, to pulverize the toughest rocks, slags and ceramics.

Grinding and mixing vials are available in: hardened steel, stainless steel, tungsten carbide, alumina ceramic, zirconia ceramic, silicon nitride, agate, polystyrene, methacrylate, and polycarbonate. CE Approved.

Applications include: Mechanical alloying, slurry grinding, blending powders and mixing emulsions.

Typical samples include: Rocks, Minerals, Sand, Cement, Slag, Ceramics, Catalyst Supports, Glass, Pharmaceuticals, Plant and Animal Tissues, Cannabis, Seeds, Paints and Ink.

 

Mixer/Mills – High Energy Ball Mills

This video features Cole-Parmer Mixer/Mills and shows how they can prepare tough samples for XRF or ICP Analysis.

* Product shown will be rebranded to Cole-Parmer*

Watch VideoFor more videos click here

  • Wide selection of grinding and mixing vials available including hardened steel, stainless steel, tungsten carbide, alumina ceramic, zirconia ceramic, silicon nitride, agate, polystyrene, methacrylate, polystyrene, and polycarbonate.
  • Electronic timer is factory-set for 100-minute range. Extended Running Time Chip is available for extending timer range to 175 hours (10,500 minutes).
  • Steel housing protects the clamp mechanism and rugged construction ensures a long life of heavy work.
  • Shock mounted motor enables bench top operation.
  • Reduces samples to analytical fineness and can be utilized for mechanical alloying and nanomilling.
  • For grinding samples in the 0.2 – 10 gram range or mixing up to 50 mL of sample. Multiple-Sample Adapters permit processing of multiple smaller samples.
  • Equipped with forced-air cooling and safety interlock system for operator protection.
  • Vibration detection switch shuts down the mill in the event of mechanical failure.
  • 3-year warranty
Gross Weight 79 lbs (36 kg)
Net Weight 77 lbs (35 kg)
Dimensions 21″ L (53cm) x 22″ W (56cm) x 14″ H (36cm)
CE Approved Yes
Voltage 115V/60Hz or 230V/50Hz
Part number 8000M
Motor 1/3 hp, 1725 RPM @ 60Hz, 1425 RPM @ 50Hz
Power Cord 3-prong grounded plug, 115V 60Hz or CEE 7/7 2-prong Europeanplug, 230V 50Hz
Clamp Movement 2 1/3 in (5.9cm) back-and-forth, 1 in (2.5cm) side-to-side
Clamp Speed 1060 cycles/minute (115V) or 875 cycles/minute (230V). Alternate pulley supplied with 230V model for 1060 cpm operation.
Timer/Controls 100 minute range. Expandable up to 1,000 or 10,000 range.*

Similar Products

Get a call back





    This will close in 0 seconds

    Request A Quote






      This will close in 0 seconds