DeltaDiode™ General Specifications
| DeltaDiode Type | Pulse Duration | Repetition Rate | Available Wavelengths |
|---|---|---|---|
| DeltaDiode Laser (Denoted with an “L” on part number) |
35 to 200 ps | 10 kHz to 100 MHz | 375 to 1,310 nm |
| DeltaDiode LED (No “L” on part number) |
750 to 950 ps | 25 MHz | 265 to 455 nm |
DeltaDiode Controller Specifications
DD-C1 Controller
| Function | Specification |
|---|---|
| Repetition Rates | 10 kHz, 20 kHz, 50 kHz, 100 kHz, 250 kHz, 500 kHz, 1 MHz, 2 MHz, 4 MHz, 5 MHz, 8 MHz, 10 MHz, 16 MHz, 20 MHz, 25 MHz, 50 MHz, 80 MHz, 100 MHz, or Trigger Input (single-shot to 50 MHz). Subject to attached head |
|
Trigger Input |
Pulse amplitude +0.5 V to +5 V, trigger threshold software programmable from +0.2 V to +2 V, 50 Ω, 20 ns minimum spacing |
|
Sync Outputs |
Simultaneous output of NIM-compatible (-0.8 Vpp 50 Ω) and TTL-compatible (+2 Vpp 50 Ω), automatic width selection 4-15 ns nominal |
|
Sync Delay Control |
Adjustment of sync output pulse timing in range -10 ns to +10 ns nominal in 1 ns steps, uncalibrated |
|
Fast Gate Input |
Pulse amplitude +0.5 V to +5 V, trigger threshold software programmable from +0.2 V to +2 V, 50 Ω. Selectable Inhibit/Enable modes |
|
Slow Gate Input |
Pulse amplitude +2 V to +5 V. 10 kΩ. Selectable Inhibit/enable modes. Operates in Pulsed and CW modes |
|
Interlock |
2-pin connector (included). Contacts must be short-circuited to enable emission |
|
Connection to Head |
1.5 m cable (included) |
|
User Interface |
LCD display (stand-alone operation) or software (PC control) |
|
PC interface |
USB 2.0 with integral hub for downstream connection to other USB peripherals (cable to host PC and software supplied) |
|
Power Requirement |
90 V to 250 V AC, 50/60 Hz, 100 VA |
|
Operating Temperature |
+15˚ C to +30˚ C (ambient) |
|
Weight & Dimensions |
3.1 kg, 234 x 255 x 92 mm |
Solas MOFA Fiber Laser Specifications
|
Parameter |
Solas 355L |
Solas 532L |
Solas 1064L |
|---|---|---|---|
|
Power |
> 7 mW at 80 MHz |
> 30 mW at 80 MHz |
> 300 mW at 80 MHz |
|
Power Stability |
0.5% RMS over 10 min |
||
|
Pulse duration |
80 to 100 ps (FWHM) |
||
|
Spectral Width |
< 0.2 nm |
< 0.4 nm |
|
|
Resolution Rate |
Pulse on demand to 100 MHz |
||
|
Pointing Stability |
< 1 μrad |
||
|
Polarization Extinction Ratio |
> 20 dB |
||
|
Beam Quality |
Multi-mode fiber output |
Circular TEM00 beam |
|
SpectraLED Specifications
| Pulse Duration | Repetition Rate | Available Wavelengths | |
|---|---|---|---|
| SpectraLED | < 250 ns to > 10 s | 0.1 to 100 kHz | 265 to 1,275 nm |
SpectraXE Specifications
| Pulse Duration | Repetition Rate | Available Wavelengths | |
|---|---|---|---|
| SpectraXE | 0.4 μs | 0.1 Hz to 80 Hz | 185 to 2,000 nm |
HPPD Specifications
| Model | Wavelength Range | Temporal Response (IRF FWHM) |
Dark Count | Quantum Efficiency |
|---|---|---|---|---|
| HPPD-650 | 220 to 650 nm | 50 ps | < 100 cps | 28% (340 nm) |
| HPPD-720 | 300 to 720 nm | 120 ps | < 1000 cps | 47% (530 nm) |
| HPPD-860 | 220 to 860 nm | 50 ps | < 200 cps | 23% (280 nm) |
| HPPD-870 | 300 to 870 nm | 130 ps | < 500 cps | 26% (630 nm) |
| HPPD-890 | 380 to 890 nm | 160 ps | < 1000 cps | 16% (630 nm) |
MCP-PMT Detectors
| HPPD-860 COOLED | MCP-PMT (R3809-50) | |
|---|---|---|
| Typical IRF FWHM at 400 nm | 40-45 ps | 40-45 ps |
| Shortest Measurable Lifetime | 40-45 ps | 5 ps |
| Wavelength Response | 220-860 nm | 160-850 nm |
| Robust for Steady State Spectra | Yes | No |
| Amplifier + CFD | Integrated (no cable) | External |
| High Voltage Bias | Integrated (no cable) | External |
| Compatible with Phos and Steady State | Yes | No (requires second detector) |
| Temperature Control | Integrated TEC (air-cooled) | External (water-cooled) |
| Dark Count Rate (Cooled) | < 200 cps | < 20 cps |
| PC Interface | N/A | N/A |
NIR TCSPC Specifications
| Model | Sensor | Wavelength Range | Temporal Response | Dark Count | Cooling |
|---|---|---|---|---|---|
| NIR-R4 | R5509-43 PMT | 300 to 1,400 nm | 1.5 ns (TTS) | < 25,000 cps | Liquid nitrogen |
| NIR-R7 | R5509-73 PMT | 300 to 1,700 nm | 1.5 ns (TTS) | < 250,000 cps | Liquid nitrogen |
| NIR-H2 | H10330-25 PMT | 950 to 1,200 nm | 400 ps (TTS) | < 2,500 cps | Thermo-electric |
| NIR-H4 | H10330-45 PMT | 950 to 1,400 nm | 400 ps (TTS) | < 25,000 cps | Thermo-electric |
| NIR-H7 | H10330-75 PMT | 950 to 1,700 nm | 400 ps (TTS) | < 250,000 cps | Thermo-electric |
| NIR-S1 | Count-100N SPAD | 400 to 1,000 nm | < 3 ns (TTS) | 100 cps | None |
FiPho TCSPC Electronics Specifications
|
Specifications |
FiPho |
FiPho-HR |
|---|---|---|
|
Full Detectable TCSPC Lifetime Range |
<20 ps to 30 sec |
5 ps to 30 sec |
|
TCSPC Converter Type |
Digital TDC |
Digital TDC and Analog TAC |
|
TCSPC Bin Width |
<15 ps |
~ 250 fs |
|
Phosphorescence Mode |
MCS |
MCS |
|
Independent Stop Channels |
1 to 4 |
1 to 4 |
|
Photon Streaming |
Included |
Included |
|
FLIM Capable |
Yes |
Yes |
Detailed FiPho Electronics Specifications
|
Specifications |
FiPho (TDC, MCS) |
FiPho-HR (TDC, TAC, MCS) |
|---|---|---|
|
Full Detectable Lifetime Range |
<20 ps to 30 sec |
5 ps to 30 sec |
|
TCSPC Time Range |
<2 ns to 55 μs |
<2 ns to 55 μs |
|
Deadtime |
5 ns |
5 ns |
|
TCSPC Bin Width |
<15 ps |
~ 250 fs |
|
Electronics Jitter (FWHM) |
30 ps |
< 10 ps |
|
TCSPC Histogram Size |
Up to 16k |
Up to 64k |
|
Histogram Bin Depth |
32 bit |
32 bit |
|
Independent Stops |
1 to 4 |
1 to 4 |
|
Maximum Start Rate |
100 MHz |
100 MHz |
|
Maximum Stop Rate |
40 Mcps |
40 Mcps |
|
Operating Mode |
Automatic Forward Timing |
Automatic Forward or Reverse timing |
|
Streaming Mode |
Photon Streaming (Time-Tag) |
Photon Streaming (Time-Tag) |
|
MCS Bin Width |
5 ns |
5 ns |
|
MCS Time Range |
< 2.5 μs to 330 seconds |
< 2.5 μs to 330 seconds |
|
Maximum MCS Histogram Size |
64k |
64k |
|
Acquisition and Analysis Macro Scripting |
Yes |
Yes |
|
PC Interface |
USB 3.0 |
USB 3.0 |
|
Software |
EzTime, EzTime Image |
EzTime, EzTime Image |
HORIBA Scientific has a policy of continuous product development, and reserves the right to amend part numbers, descriptions and specifications without prior notice.
